| Mileage Correction .Net :: |
| Author |
Message |
sofy
Member
Joined: 07 Dec 2005
Posts: 39
|
| Posted: Thu Dec 08, 2005 1:26 pm Post subject: Xsara Picaso 2002 |
 |
|
Hi all,
i have problem with this vehicle the dash had 93c66 with no problem but the problem i think with the bsi coz the dash reads 999657 it's not true valu it's random valu the NEC dongle reads the bsi and i had put 0 as a new valu and i had programed the cluster 50000 km but after get back first the bsi and after the cluster the end valu was 999657 the same old
waiting your advice please
thanks for all |
|
| Back to top |
|
 |
Google
|
| Posted: Post subject: Sponsored Link |
|
|
|
|
| Back to top |
|
|
Nick
Moderator
Joined: 24 Oct 2005
Posts: 623
|
| Posted: Sun Dec 11, 2005 5:44 pm Post subject: Xsara Picaso 2002 |
|
|
Hello Sofy,
could you read the original km on the dash and bsi? Only then you can program both instruments.
Regards,
Nick |
|
| Back to top |
|
|
sofy
Member
Joined: 07 Dec 2005
Posts: 39
|
| Posted: Wed Dec 14, 2005 2:24 pm Post subject: |
|
|
Hi all,
Thank you for reply Nick.
yes sure i was read the bsi by nec dongle with my diga because i can't put 0 as a new value with nec without the diga first saved the old as you know (if any error with 14 wires soldered the nec does't ask me for new valu).
but note befor doing any work the cluster showed 999878KM so the diga reads not true value as a old value.
-are anyone had this KM cluster value befor? coz i have in my city many xsara and xsara picasso has the same problem the cluster show 999766 or any value like this.
in the first time i tryied to program the bsi to 0 and i thought after this programing with real value for the cluster evrything will be ok.
but after programing the both instruments evrything still without any results.
waiting any help
bye |
|
| Back to top |
|
|
|
