| Mileage Correction .Net :: |
| Author |
Message |
Guest
|
| Posted: Tue Apr 19, 2005 6:40 pm Post subject: Camry 93C46 question |
 |
|
Okay, I took the cluster apart and found the 93C46 eeprom chip but was not able to use the 8-pin clip to clip the chip from the top because the speedo is blocking it and I'm afraid that I might break the speedo needle if I take this thing apart.
What's the correct way of doing this car? because the manual does not state anything about it. Thanks. |
|
| Back to top |
|
 |
Google
|
| Posted: Post subject: Sponsored Link |
|
|
|
|
| Back to top |
|
|
DashfixDotNet
Moderator
Joined: 20 Nov 2004
Posts: 271
Location: USA
|
| Posted: Sat Apr 23, 2005 6:14 am Post subject: |
|
|
Hello,
Use a desoldering gun to get rid of solder that's on each pin of the eeprom. Remove it then from the board and program it. It's the safest and best way to work on it.
Serge |
|
| Back to top |
|
|
fbones
Junior member
Joined: 03 Nov 2004
Posts: 19
|
| Posted: Sun May 22, 2005 9:24 am Post subject: |
|
|
| Can you suggest a desoldering gun tool? Thanks. |
|
| Back to top |
|
|
DashfixDotNet
Moderator
Joined: 20 Nov 2004
Posts: 271
Location: USA
|
| Posted: Mon May 23, 2005 7:15 am Post subject: |
|
|
| Hakko 808 |
|
| Back to top |
|
|
terrym4616
New member
Joined: 24 Jan 2007
Posts: 1
|
| Posted: Wed Jan 24, 2007 5:01 am Post subject: |
|
|
| i usualy just solder wires under the 8 pin chip its much easer than trying to desolder the chip off |
|
| Back to top |
|
|
mj75s
New member
Joined: 27 Jun 2007
Posts: 5
|
| Posted: Tue Jul 10, 2007 10:48 pm Post subject: trouble with camry |
|
|
| Hey what port do I attach to program the camry's 93c46? I have it on port 0 and the eprom clip attached correctly. Can someone e-mail the help guide to me on the camry..also has anyone had any luck programming the usa crysler minivans?? Please e-mail me your thoughts Mseiler27@excite.com.... |
|
| Back to top |
|
|
|
