| Mileage Correction .Net :: |
| Author |
Message |
Guest
|
| Posted: Sat Dec 29, 2007 9:59 pm Post subject: BMW E46 Odometer correction |
 |
|
Happy Holidays!!
I need to correct the mileage on my odometer. I have an E46 (prod: 10/9 . what are the location i need to change or what must be done. Will a BMW Scanner v1.2.5 do the work? thanks in advance |
|
| Back to top |
|
 |
Google
|
| Posted: Post subject: Sponsored Link |
|
|
|
|
| Back to top |
|
|
toniz
Junior member
Joined: 19 Nov 2006
Posts: 23
|
| Posted: Tue Jan 08, 2008 5:13 pm Post subject: |
|
|
You will need BMW Scanner 1.2.6
You can do just the cluster, but if you want the dealer not to be able to find out you'll need to do LCM and EWS as well. |
|
| Back to top |
|
|
bmw525i
New member
Joined: 07 Jan 2008
Posts: 7
|
| Posted: Tue Jan 08, 2008 6:29 pm Post subject: |
|
|
| toniz wrote: | You will need BMW Scanner 1.2.6
You can do just the cluster, but if you want the dealer not to be able to find out you'll need to do LCM and EWS as well. |
Does he not have the M35080 chip in his IKE? If he does not program the LCM and EWS, will it not throw a manipulation dot? |
|
| Back to top |
|
|
DashfixDotNet
Moderator
Joined: 20 Nov 2004
Posts: 269
Location: USA
|
| Posted: Wed Jan 09, 2008 9:29 am Post subject: |
|
|
To bmw525i:
M35080 equipped IKE cannot be serviced through diagnostic but directly. The manipulation dot appears only if the VIN numbers of the IKE and LCM don't match and not because of a mileage difference.
Also regarding your bimmer it's likely that your dash is a SW13 with 93S66 eeprom if the car is built within year 2000 and if your dash has two push buttons...but you might have a M35080 too. Just pull the dash out and read the SW/HW numbers; post it here and I will tell you what you got inside.
You can also find stand-alone EWS programmers that does not require solderings such as this one: http://www.carcodtool.com/bmw_reseter.html
Serge |
|
| Back to top |
|
|
bmw525i
New member
Joined: 07 Jan 2008
Posts: 7
|
| Posted: Wed Jan 09, 2008 6:32 pm Post subject: |
|
|
| DashfixDotNet wrote: | To bmw525i:
M35080 equipped IKE cannot be serviced through diagnostic but directly. The manipulation dot appears only if the VIN numbers of the IKE and LCM don't match and not because of a mileage difference. You can also find stand-alone EWS programmers that does not require solderings such as this one: http://www.carcodtool.com/bmw_reseter.html
Serge |
Thank you for your help Serge, it's much appreciated. |
|
| Back to top |
|
|
bmw525i
New member
Joined: 07 Jan 2008
Posts: 7
|
| Posted: Thu Jan 10, 2008 12:22 am Post subject: |
|
|
In relation to the BMW Reseter, it states it resets the EWS to 000316 KM.
Technically this puts me back in square 1. Yes it's very low mileage, but it's still incorrect regardless.
How do I change it to the KM readings that have been written to the IKE and LCM?
Thanks again. |
|
| Back to top |
|
|
softronix
Junior member
Joined: 25 Jul 2007
Posts: 13
Location: Toronto
|
| Posted: Thu Jan 10, 2008 6:00 am Post subject: |
|
|
Hi,
You only need to program speedo at new value , ews and lcm can be done zero km . Once you put the key in ignition , the last two will copy value from speedo. So all 3 will be the same.
Clear enough?
Mike |
|
| Back to top |
|
|
bmw525i
New member
Joined: 07 Jan 2008
Posts: 7
|
| Posted: Thu Jan 10, 2008 6:36 pm Post subject: |
|
|
| softronix wrote: | Hi,
You only need to program speedo at new value , ews and lcm can be done zero km . Once you put the key in ignition , the last two will copy value from speedo. So all 3 will be the same.
Clear enough?
Mike |
Yes Mike it certainly is! 
Thank you! |
|
| Back to top |
|
|
kng99 e46
New member
Joined: 29 Dec 2007
Posts: 1
|
| Posted: Sat Jan 12, 2008 2:38 am Post subject: |
|
|
hello thanks for the feedback guys...
my HW is 5.0 and my SW is 13.0
the production date of the car is 10/98
so can i correct the odometer with my bmwscanner v1.2.5?
or i need something else...
if i can use my scanner..... can anyone help me w the steps
i connected my scanner through the 20pin port and i'm able to access the IKE
but it doesn't allow me to use the "odometer correction" feature...is grayed out
thanks again |
|
| Back to top |
|
|
|
