| Mileage Correction .Net :: |
| Author |
Message |
m3cab
New member
Joined: 14 May 2007
Posts: 2
Location: Lyon France
|
| Posted: Mon May 14, 2007 2:27 pm Post subject: E46 Odometer correction |
 |
|
Hi everyone,
I've read all the posts ont this forum, and the think appears more clear to me.
In BMW E46 from 09/2001 mileage is stored in:
- LCM ( Light Module - the light button to switch on and off lights in fact).
You must modify this milage.
- EWS ( i dont know where it is ? maybe inside the dashboard)
you must modify the milage.
- The Keys (In the two electonic keys)
There is no obligation to reprogram the keys.
Once the Milage is modified, you'll just have to drive the car for more than 40 km/h and the new value will be upgraded in the key.
My questions are:
1- What hardware must i buy to be able to do this ? (internet link please)
2- Is software included, or what software do i have to buy to do that ? (internet link please)
3- Does this same software allows to clear error codes, reset service, and activate onboard Options, or Key memory options ?
4- Can we do all these operations just connecting the OBDII or do we have to unsold (unclip) some eeprom ?
5- Is there any TUTORIAL available ?
6- is there someone in france that can do it ? (location Lyon)
Than you in advance. |
|
| Back to top |
|
 |
Google
|
| Posted: Post subject: Sponsored Link |
|
|
|
|
| Back to top |
|
|
Nick
Moderator
Joined: 24 Oct 2005
Posts: 623
|
| Posted: Thu Jun 14, 2007 9:48 am Post subject: E46 Odometer correction |
|
|
Hello m3cab,
on the BMW E46 after 07/2000 the mileage is stored in the cluster, EWS, keys and LCM modules. All modules have to be program.
The EWS (electronic immobiliser ) isnīt inside the dashboard, the unit module is situated underneath the steering wheel section.
1/2- You need a odometer correction programmer like the Diga Consult. The software is included and www.diga-soft.de. But that doesnīt count for only one model, the DIGA-Consult is a professional tool for service work!
3- Yes, with the Diga Consult you can clear error codes, reset service, and activate onboard Options, or Key memory options.
4- Only the programming on the LCM is through diagnostic, the cluster and the EWS manually.
5- Yes, there is a TUTORIAL available
6- I donīt know anyone in France who can adjust your odometer.
Regards,
Nick |
|
| Back to top |
|
|
m3cab
New member
Joined: 14 May 2007
Posts: 2
Location: Lyon France
|
| Posted: Thu Jun 14, 2007 4:01 pm Post subject: thanks |
|
|
| than you for your answer. |
|
| Back to top |
|
|
BMW328
New member
Joined: 19 Apr 2008
Posts: 1
|
| Posted: Sun Apr 20, 2008 2:09 am Post subject: |
|
|
Hi Everyone,
I've also went through all the thread in the forum. but still a little bit confused.
I have a 03/2000 BMW E46. so it's not a M35080?
Hence with PA-Soft or DIGA i can update LCM / EWS / Cluster all through diagnostic?
appreciate everyone's help.
Will |
|
| Back to top |
|
|
rikko6
Junior member
Joined: 26 Jan 2006
Posts: 15
Location: Australia
|
| Posted: Wed Apr 23, 2008 12:47 am Post subject: |
|
|
| cluster is M35080 |
|
| Back to top |
|
|
blkm3
New member
Joined: 22 Apr 2008
Posts: 1
|
| Posted: Wed Apr 23, 2008 12:10 pm Post subject: |
|
|
| rikko6 wrote: | | cluster is M35080 |
so does this mean everything can be done through diagnostics (pa soft 1.36 ) if the yr of the car is ( 1999-2000). |
|
| Back to top |
|
|
toniz
Junior member
Joined: 19 Nov 2006
Posts: 23
|
| Posted: Sun Apr 27, 2008 9:47 pm Post subject: |
|
|
No,
You have to do the M35080 and EWS with programmer.
LCM you can do with Pasoft. |
|
| Back to top |
|
|
|
